Pioneer DEH-P700BT Owner's Manual - Page 29

Operating this unit Section 02 Operating this unit # If the difference between the ring volume and caller's voice volume is big, overall volume level may become unstable. # Before disconnecting the cellular phone from this unit, make sure to adjust the volume to a proper level. If the volume is muted (zero level) on your cellular phone, the volume level of your cellular phone remains muted even after the cellular phone is disconnected. Notes ! The equalizer curve for the phone source is fixed. ! When selecting the phone source, you can only operate FADER (balance adjustment) in the audio menu. ! When selecting the phone source, the fader value is set to FADER :F15 as an initial setting. Introduction of connection and registration 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select CONNECTION. The connection menu is displayed. Turn to change the menu option. Press to select. # You can also select this menu by pressing and holding PHONE/ /CONNECT on the ordinary display. 3 Turn MULTI-CONTROL to select the function. PAIRED PHONE (paired phone)- BT HANDS FREE (new phone)-SET PHONE (phone registration)-DISCONNECT PHONE (disconnect phone)-DELETE PHONE (delete phone) If the phone is not connected and not paired The following function can be operated. ! BT HANDS FREE (new phone) If the phone is not connected but paired The following functions can be operated. ! PAIRED PHONE (pair phone manually) ! BT HANDS FREE (new phone) ! DELETE PHONE (delete phone) If the phone is connected but not paired The following functions can be operated. ! SET PHONE (phone registration) ! DISCONNECT PHONE (disconnect phone) ! DELETE PHONE (delete phone) If the phone is connected and paired The following functions can be operated. ! DISCONNECT PHONE (disconnect phone) ! DELETE PHONE (delete phone) Notes ! The device name is set to PIONEER FLAP BT as default. You can change the device name in the initial setting. Refer to Editing device name on page 49. ! PIN code is set to 0000 as the default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless connection on page 48. Connecting and disconnecting a cellular phone Using a cellular phone to initiate a connection 1 Display the connection menu. Refer to Introduction of connection and registration on this page. 2 Use MULTI-CONTROL to select BT HANDS FREE. 3 Use MULTI-CONTROL to select a group. Push MULTI-CONTROL up or down to select a group. NOKIA (Nokia)-STANDARD (standard) # Normally select STANDARD. If the device of Nokia is not paired to this unit, select NOKIA. # Push MULTI-CONTROL left or right to display a group name or an ID. 4 Press MULTI-CONTROL to switch to PAIRE FROM PHONE. Push MULTI-CONTROL up or down to switch PAIRE FROM PHONE and SEARCH DEVICE. En 29