Pioneer PRO110FD Owner's Manual - Page 99
Manufacturing Reset
UPC - 012562864976
View all Pioneer PRO110FD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Useful Remote Control Features 14 Manufacturing Reset All learned and preset codes can be returned to the factory defaults regardless of the mode. 1 Press EDIT/LEARN and TV a at the same time. The Mode switch setting is ignored. • The LED indicator flashes and the remote control unit enters the Manufacturing Reset mode. 2 Press D (yellow) to reset the remote control. • The manufacturing reset is complete. The LED flashes for one second then the remote control unit returns to normal operation. Note • To exit the Edit mode before it is complete, press EDIT/LEARN again. • If the Mode switch selection is changed when in the Edit mode, the Edit session is canceled. • If no operation is performed within one minute, the Edit session is canceled. • When you enter an unlisted code, the LED flashes repeatedly. • If the tables on pages 100 to 104 do not include your device's manufacturer or the remote control does not work, use the Learn mode. • The initial mode is "PIONEER". • When using any of the receiver buttons (a, INPUT, or VOL +/ -) to cancel the Learn mode, follow the procedure with the Mode switch set to "TV". You cannot cancel the mode otherwise. • You may not be able to partially or entirely control some equipment in the tables. 99 En