Pioneer VSX-921-K Owner's Manual - Page 40
The Speaker System setting, The Video Parameter setting
UPC - 884938133159
View all Pioneer VSX-921-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
06 The System Setup menu The Speaker System setting Specify either using the surround back speaker (or the speaker B), or the front height speaker connection with the Bspeaker terminals. • Default setting: Surr. Back 1 Select 'Speaker System' from the System Setup menu. System Setup 1.Auto MCACC 2.Manual SP Setup 3.Input Assign 4.Speaker System 5.Video Parameter 6.HDMI Setup 7.Auto Power Down 8.FL Demo Mode Return 4.Speaker System SP System Surr. Back Return 2 Select the speaker system setting using /. • Surr. Back - Sound is output from the surround back speaker or the speaker B. • Height - Sound is output from front height speaker. 3 When you're finished, press RETURN. You return to the System Setup menu. The Video Parameter setting This receiver can up-convert the video signal input from the composite/component video terminals; the output is from the HDMI OUT terminal. The following shows the various settings for this function. Video Converter This setting specifies valid/invalid for the function that converts the input video signal from each composite/ component video terminal. When OFF is selected, Resolution and Aspect can not be set. 1 Select 'Video Parameter' from the System Setup menu. 2 Select 'Video Converter' from the Video Parameter menu. 5.Video Parameter a.Video Converter b.Resolution c.Aspect 5a.Video Converter DVR/BDR DVD BD VIDEO1 ON [ OFF ] [ OFF ] [ OFF ] Return Return 3 Select the setting for converting each type of video input. • ON - The signal is output also to the HDMI OUT terminal. • OFF - The signal input from the HDMI terminal of the selected input function will be output from the HDMI OUT terminal. The signal input from the analog composite video and the component video will not be output from the HDMI OUT terminal. 4 When you're finished, press RETURN. You return to the Video Parameter menu. Resolution Specifies the output resolution of the video signal (when video input signals are output at the HDMI OUT terminal, select this according to the resolution of your monitor and the images you wish to watch). 1 Select 'Video Parameter' from the System Setup menu. 2 Select 'Resolution' from the Video Parameter menu. 5.Video Parameter a.Video Converter b.Resolution c.Aspect 5b.Resolution Resolution AUTO Return Return 3 Select output resolution. • AUTO - The resolution is selected automatically according to the capacity of the TV (monitor) connected by HDMI. • PURE - The signals are output with the same resolution as when input. • 480p/720p/1080i/1080p - The signal is output with the resolution specified here (480p means the resolution of 480p/576p). 4 When you're finished, press RETURN. You return to the Video Parameter menu. Note • When set to a resolution with which the TV (monitor) is not compatible, no picture is output. Also, in some cases no picture will be output due to copyright protection signals. In this case, change the setting. • When a display is connected by HDMI, if this is set to something other than PURE and 480i/576i analog signals are input, 480p/576p signals are output from the component output terminals. 40 En