Ricoh 3245 Operating Instructions - Page 38

Copying ❒ To register the custom size entered, press [Program], and then press [Exit]. A Open the bypass tray, and then adjust the guides to the paper size. B Gently insert the OHP transpar- encies or thick paper face up until the beeper sounds. 2 Important ❒ When copying onto OHP trans- parencies, make sure that the cut positions are set properly. E Press [OK]. ❒ To avoid paper misfeeds, fan D Place the originals, and then press the {Start} key. Note ❒ When the Sort function is set, press the {#} key after all origi- the paper before loading it in the tray. C Press the {#} key. D Select [OHP Sheet] or [Thick Paper]. nals have been scanned. E When your copy job is finished, press the {Clear Modes} key to clear the settings. When copying onto OHP Transparencies or Thick Paper To make copies onto OHP transparencies or thick paper, you need to specify the paper type and size. See p.23 "When copying onto standard size paper", p.23 "When copying onto custom size paper". Important ❒ We recommend you use OHP trans- parencies made by this manufacturer. Note ❒ Paper will be delivered to external tray when copying onto OHP transparencies or thick paper from the bypass tray, even if you have specified not to use the external tray as the output tray. 24 E Select the paper size. F Press [OK] twice. G Place the originals, and then press the {Start} key. Important ❒ When copying onto OHP trans- parencies, remove copied sheets one by one. H When your copy job is finished, press the {Clear Modes} key to clear the settings.