Ricoh 3245 Operating Instructions - Page 54

Copying C Make sure [Size Magnificatn] is high- lighted. D Enter the length of the original using the number keys, and then press [#]. 2 Note ❒ You can enter sizes within the following ranges: Metric 1-999 mm version (increments of 1 mm) Inch 0.1"-99.9" version (increments of 0.1") E Enter the length of the copy using the number keys, and then press [#]. Note ❒ To change the length after press- ing [#], select [Original] or [Copy], and then enter the length. F Press [OK] twice. G Place the originals, and then press the {Start} key. Directional Magnification (%) Copies can be reduced or enlarged at different reproduction ratios, horizontally and vertically. a: Horizontal ratio b: Vertical ratio 40 CP2P01EE Note ❒ You can also select a preset ratio close to the ratio using [Reduce] or [Enlarge], and then adjust it further, using [n] or [o]. A Press [Reduce / Enlarge]. B Press [Specifd. Ratio]. C Press [Direct. Mag.%]. To enter the ratio using the number keys A Press [Horizontal]. B Enter the ratio using the number keys, and then press [#]. C Press [Vertical]. D Enter the ratio using the number keys, and then press [#]. E Press [OK]. To specify a ratio using [n] and [o] A Press [With no]. B Press [Horizontal]. C Adjust the ratio using [n] or [o]. Note ❒ Pressing [n] or [o] changes the ratio in increments of 1%. Pressing and holding down [n] or [o] changes it in increments of 10%.