Ricoh 3245 Operating Instructions - Page 77
Double Copies
UPC - 026649128660
View all Ricoh 3245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Copier Functions C Press [Edit Image]. D Press [Image Repeat]. C Press [Edit / Colour Creation]. D Press [Edit Image]. E E Make sure that [Whole Area] is se- Press [Image Repeat]. lected, then press [OK]. F Press [OK] twice. G Place the original, and then press F Press [Specified Area]. G Enter the length of [X1] with the number keys, then press [#]. 2 the {Start} key. H Enter the length of [Y1] with the Specified Area Repeat You can use this function only when you are making a copy from the Exposure Glass. number keys, then press [#]. I Enter the length of [X2] with the number keys, then press [#]. J Enter the length of the [Y2] by Note ❒ The base point X1, Y1, and the number keys, then press [#]. K Press [OK] three times. length set by point X2, Y2 determines the area of an image repeatedly copied. Limitation L Place the original on the exposure glass, and then press the {Start} key. ❒ You cannot use the specified area repeat from ADF. Double Copies One original image is copied twice onto one sheet, as shown. GCRE032E 1. Set on the exposure glass A Specify the location of the area's base point (X1, Y1), and its length and width (X2, Y2). Note ❒ You can set any value in the range of X1: 0~412mm (0"~16.2"), X2: 20~432mm (0.8"~17.0"), Y1: 0~277mm (0"~10.8"), and Y2: 20~297mm (0.8"~11.6"). B Select the size of the copy paper and the reproduction ratio. Note ❒ You cannot use the bypass tray with this function. ❒ See the following table for original and copy paper sizes and orientations when using a 100% ratio: 63