Ricoh 3245 Operating Instructions - Page 44
Erase Colour
UPC - 026649128660
View all Ricoh 3245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Copying E Select any one item from [Conver- sion 1] to [Conversion 4]. Erase Colour You can erase a certain colour in the image of the original. Note ❒ It is possible to select up to 4 col- 2 ours. F Select the colour to be converted. G Select the new colour to be con- verted. Note ❒ You can adjust the density of each colour in 4 levels. ❒ The width of the colour to be deleted can be adjusted in 5 levels. If the colour width is set to "Wider" and red has been specified, colours which are close to magenta or orange, will also be deleted. The colour width can be adjusted in the "User Tools". See p.123 "Colour Sensitivity" A Press [Edit / Colour Creation]. ❒ When you want to change the converted colour, press from [Conversion 1] to [Conversion 4] and make the selection again. ❒ When changing between more than two colours, repeat steps E to G. Selecting from [User Colour] A Press [User Colour]. B Select from the registered col- ours, then press [OK]. H After selecting all the colours to be converted, press [OK]. I Press [OK] 3 times. J Place the originals, and then press the {Start} key. B Press [Colour Creation]. C Press [Erase Colour]. D Select the colour to be erased. Note ❒ You can cancel the selection by pressing the selected (highlighted) key. ❒ You can erase 4 colours at once. E Press [OK] after selecting all the colours to be deleted. F Press [OK] twice. G Place the originals, and then press the {Start} key. 30