Ricoh 3245 Printer Reference - Page 103

Printing with the Finisher Punching Precautions Limitation ❒ Punching cannot be done when paper is fed from the bypass tray. Note ❒ If you cannot make punch settings even with the finisher installed, options may not be set correctly in the printer driver. Correct option settings in the printer driver. For details, see the printer driver Help. ❒ When duplex printing is selected, adjust punch positions according to binding orientation. ❒ Be sure to set the punch position the same as the staple position when using it with the staple function. ❒ Be sure to set paper size and orientation in the printer driver when punching. 4 • Depending on the software you are using, print settings may not be enabled and the printed result may not be as expected. ❒ Punch will be canceled under the following conditions: • When a paper size that cannot be punched is selected. For information about paper sizes that can be punched, see "Specifications", General Settings Guide. • If positions other than those fixed for punching are specified. • If there are inconsistencies between the orientation in duplex mode and the punch position. • When feeding paper from the bypass tray. • When the punch receptacle has become full and Auto Continue is set, printing will continue without punching after the message appears. 97