Ricoh 3245 Printer Reference - Page 20

Getting Started Setting Paper on the Bypass Tray This section gives instructions for set- Limitation 1 ting paper on the bypass tray. Use the bypass tray to print onto OHP transparencies, labels, thick paper, and envelopes that cannot be loaded in the ❒ The following functions are disabled when printing from the bypass tray: paper tray. • Duplex printing Reference For details about setting paper in • Auto Tray Select • Auto Tray Switching the regular paper tray, see General • Rotating Collate Settings Guide. • Staple (when the optional unit is Note ❒ When loading letterhead paper, pay attention to its orientation. See installed) • Punch (when the optional unit is installed) "Orientation-Fixed Paper or TwoSided Paper", General Settings Guide. ❒ Paper within the following dimensions can be set in the bypass tray: Important ❒ When printing using the printer function, original images are always rotated by 180 degrees (the orientation of images to be printed • Vertical: 90 - 305 mm (3.6 - 12.1 in.) is opposite to that of the copier • Horizontal: 148 - 600 mm (5.9 23.7 in.) ❒ Be sure to set the paper with the side you want to print facing down in the bypass tray. function). When printing onto paper with specific orientation requirements, such as envelopes and letterheads, make sure to rotate the paper feed orientation to 180 degrees. ❒ When loading OHP transparencies or thick paper in the bypass tray, make the paper setting using the control panel or printer driver. ❒ Be sure to set the paper size using the printer driver when printing data from the computer. The paper size set using the printer driver has ❒ The number of sheets that can be priority over the one set using the loaded in the bypass tray depends display panel. on the paper type. ❒ Paper sizes fed from the bypass A Open the bypass tray. tray are output first sheet down, print side-up. 14 AEU004S