Ricoh 3245 Printer Reference - Page 19

Connecting the Machine E Turn on the computer. B Turn off the main power switch. Note Important ❒ When using Windows 95/98/ Me/2000/XP and Windows Server 2003, a printer driver in- ❒ Make sure the main power is off. See "Turning On the Pow- 1 er", General Settings Guide. stallation screen might appear when the computer is turned on. If this happens, click [Cancel] C Connect the Ethernet cable to the 10 BASE-T / 100 BASE-TX port. on the screen. For more infor- mation, see p.19 "Preparing the Machine". The machine and computer are now connected. The printer driver must be installed next. For information about how to install the printer driver, see p.19 "Preparing the Machine". AEU040S Connecting to the Ethernet Interface D Turn on the main power switch. The network interface board supports 10 BASE-T or 100 BASE-TX connections. Important ❒ Before making the connection, touch the metallic part to ground yourself. A A core for the Ethernet cable is supplied with this machine. The Ethernet cable loop should be about 15 cm (6 in.) (A) from the machine end of the cable. ZKRH050E 1. Indicator (green) Remains green when the machine is properly connected to the network. 2. Indicator (yellow) Turns yellow when 100 BASE-TX is operating. Turns off when 10 BASE-T is operating. AEV047S 13