Ricoh 3245 Printer Reference - Page 143

Troubleshooting Troubleshooting Error & Status Messages on the Display Panel This section describes the principal messages that appear on the panel display. If a message not described here appears, act according to the message. Reference Before turning the main power off, see "Turning On the Power", General Settings Guide. ❖ Status messages Message Hex Dump Mode Offline Please wait. Printing... Ready Resetting job... Setting change... Waiting... Status In Hex Dump mode, the machine receives data in hexadecimal format. Turn off the machine after printing, and then turn back on. The machine is offline. To start printing, switch the machine online by pressing [Online] on the display panel. The machine is preparing the development unit. Wait a while. The machine is printing. Wait a while. This is the default ready message. The machine is ready for use. No action is required. The machine is resetting the print job. Wait until "Ready" appears on the display panel. The machine is setting changing. Wait a while. 8 The machine is waiting for the next data to print. Wait a while. ❖ Alert messages Messages/Second messages Causes Solutions Authentication has failed. The login user name or password entered is incorrect. The machine currently cannot perform authentication. Check your login user name and password. Consult an administrator. Cannot store data of this size. The maximum size of files stored in the document sever has been exceeded. Reduce the size of the file you want to download. Collate has been cancelled. The collate print function has been canceled. Turn off the main power switch, and back on again. If the message appears again, contact your sales or service representative. 137