Ricoh 3245 Printer Reference - Page 111
Form Feed
UPC - 026649128660
View all Ricoh 3245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Form Feed Form Feed This section gives instructions for operating the machine when there is no tray for the selected paper size or type, or when paper loaded in the machine has run out. Limitation ❒ The tray cannot be changed if the following functions are set for it: • Staple Print Using a Selected Tray A Select the tray for form feed from those that appear on the display panel. If you want to print after adding paper to the tray, select the tray after loading the correct paper. • Punch • Duplex Printing to a tray that does not support duplex printing Note ❒ To load paper in the bypass 4 tray, see p.14 "Setting Paper on the Bypass Tray". • Cover Sheet B Press [Continue]. • Front and Back Covers • Slip Sheet The machine prints using the selected tray. Note ❒ If form feed is selected for a tray with the following settings, you can change the tray by canceling the settings: • Staple • Punch ❒ If Auto Continue is selected, form fed paper is printed after a set interval. See p.115 "System". If the machine does not have a tray for the selected paper size or paper type, or if the selected paper loaded in the machine has run out, a caution message appears. If this message appears, do one of the following: Note ❒ If a tray with a smaller paper size is selected, the print job may be cut short, or other problems may occur. 105