Samsung L700 User Manual - Page 36
Metering, Continuous shot
UPC - 044701007814
View all Samsung L700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Metering ■ If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. - Multi - Spot : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be METERING Multi Spot biased towards the centre of the image area. This is suitable for general use. : Only the rectangular area in the centre of the LCD monitor will be metered for light. This is the preferable setting when you want the subject in the centre of the image exposed correctly, regardless of the back lighting. INFORMATION ● If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation. Continuous shot ■ Select the number of pictures in continuous shooting. - Single : Take one picture only - Continuous : Images will be taken continuously until the shutter button is released. The shooting capacity depends on SHOOTING Single Continuous AEB the memory available. - AEB : Take three pictures in a series in different exposures: short exposure (-0.5EV), standard exposure (0.0EV) and over exposure (+0.5EV). Use this mode if it is hard to decide exposure of the object. ※ High resolution and picture quality increases file saving time, which increases stand-by time. ※ If fewer than 3 pictures are available in the memory, the AEB shooting is not available. ※ It is best to use a tripod for the AEB shooting as the time to save each image file is longer and the blurring caused by camera shake may occur. Sharpness ■ You can adjust the sharpness of the picture you are about to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. SHARPNESS Soft Normal Vivid - Soft : The edges of the image are softened. This effect is suitable for editing images on your PC. - Normal : The edges of the image are sharp. This is suitable for printing. - Vivid : The edges of the image are emphasized. The edges will appear sharp, but noise may occur in the recorded image. 《35》