Samsung NE58H9970WS/AA User Manual Ver.1.0 (English, French) - Page 71

07 MAINTAINING YOUR APPLIANCE Before a self-cleaning cycle Fig. 1 Fig. 2 Don't hand clean the oven door gasket. You may hand clean the door. • We recommend venting your kitchen by opening a window or using a ventilation fan or hood during the self-cleaning cycle. • Remove the wire rack, broil pan, broil pan insert, all cookware, and any aluminum foil from the oven. • Wipe up debris from the oven bottom. (Fig. 1) • The silver-colored oven racks can be selfcleaned, but they will darken, lose their luster, and become hard to slide. • Residue on the front frame of the range and outside the gasket on the door will need to be cleaned by hand. Clean these areas with hot water, soap-filled steel-wool pads, or cleansers such as Soft Scrub. Rinse well with clean water and dry. • Do not clean the gasket. The fiberglass material of the oven door gasket cannot withstand abrasion. It is essential for the gasket to remain intact. If you notice it becoming worn or frayed, replace it. (Fig. 2) • Make sure the oven light bulb cover is in place and the oven light is off. Remove oven racks and accessories before starting the self-clean mode. How to run a self-cleaning cycle 1. Select the length of time for the self-cleaning operation, eg. 3 hours. Press SELF CLEAN once for a 3 hour clean time, twice for a 4 hour clean time, or 3 times for a 5 hour clean time. The default setting is 3 hours. 2. Start the self-cleaning cycle. Press START SET. The motor-driven door lock will engage automatically. 3. When the self-cleaning cycle is done, End will show in the display and a beep will sound 6 times. English - 71 Manual Users_NE58H9970WS_AA_AC_DG68-00550A-00_EN.indd 71 19/05/2014 18:21:36