Samsung NE58H9970WS/AA User Manual Ver.1.0 (English, French) - Page 76

To lubricate the slides with graphite lubricant

Page 76 highlights

To lubricate the slides with graphite lubricant 1. Remove the rack from the oven. See removing the gliding rack in the USING THE GLIDING RACK section. 2. Fully extend the rack on a table or countertop. Newspaper may be placed underneath the rack for easy cleanup. 3. If there is debris in the slide tracks, wipe it away using a paper towel. (Any graphite lubricant wiped away must be replaced - See steps 4 through 7. 4. Shake the graphite lubricant before opening 3 it. Starting with the left (front and back) slide mechanism of the rack, place four (4) small drops of lubricant on the two (2) bottom tracks of the slide close to the bearing carriers. 4 5. Repeat for the right (front and back) slide mechanism of the rack. 6. Open and close the rack several times to distribute 4 the lubricant. 7. Replace the cap on the lubricant and shake it again. Turn the rack over and repeat steps 3, 4, 5 and 6. 8. Close the rack, turn rack right-side-up and place in 5 the oven. See installing the gliding rack in the USING THE GLIDING RACK section. • Do not spray the gliding rack with cooking 5 spray or other lubricant sprays. English - 76 Manual Users_NE58H9970WS_AA_AC_DG68-00550A-00_EN.indd 76 19/05/2014 18:21:38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192

To lubricate the slides with graphite lubricant
1
. Remove the rack from the oven. See removing
the gliding rack in the USING THE GLIDING RACK
section.
2
.
Fully extend the rack on a table or countertop.
Newspaper may be placed underneath the rack for
easy cleanup.
3
.
If there is debris in the slide tracks, wipe it away
using a paper towel. (Any graphite lubricant wiped
away must be replaced - See steps 4 through 7.
4
. Shake the graphite lubricant before opening
it. Starting with the left (front and back) slide
mechanism of the rack, place four (4) small drops
of lubricant on the two (2) bottom tracks of the slide
close to the bearing carriers.
5
. Repeat for the right (front and back) slide
mechanism of the rack.
6
.
Open and close the rack several times to distribute
the lubricant.
7
.
Replace the cap on the lubricant and shake it again.
Turn the rack over and repeat steps 3, 4, 5 and 6.
8
.
Close the rack, turn rack right-side-up and place in
the oven. See installing the gliding rack in the USING
THE GLIDING RACK section.
• Do not spray the gliding rack with cooking
spray or other lubricant sprays.
3
4
4
5
5
English - 76
Manual Users_NE58H9970WS_AA_AC_DG68-00550A-00_EN.indd
76
19/05/2014
18:21:38