Samsung SCX-5639FR User Manual (user Manual) (ver.1.01) (English) - Page 60

Media and tray 2. Menu overview and basic setup 60 • Before you load preprinted paper, verify that the ink on the paper is dry. During the fusing process, wet ink can come off preprinted paper, reducing print quality. 7   Setting the paper size and After loading paper in the paper tray, set the paper size and using the control panel buttons. • Accessing menus may differ from model to model (see "Accessing the menu" on page 32). • It may be necessary to press OK to navigate to lower-level menus for some models. • The settings set from the machine driver override the settings on the control panel. a To print from an application, open an application and start the print menu. b Open Printing Preferences (see "Opening printing preferences" on page 66). c Press the Paper tab and select an appropriate paper . • If you want to use special-sized paper such as billing paper, select the Paper tab > Size > Edit... and set Custom Paper Size Settings in the Printing Preferences (see "Opening printing preferences" on page 66). 8   Preparing originals 1 Select (Menu) > System Setup > Paper Setup > Paper Size or Paper on the control panel. Or select Setup> Machine Setup >Next > Paper Setup > select a tray > Paper Size or Paper on the touch screen. 2 Select the tray and the option you want. 3 Press OK to save the selection. • Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or larger than 216 x 356 mm (8.5 x 14 inches). • Do not attempt to load the following s of paper, in order to prevent paper jam, low print quality and machine damage. - Carbon-paper or carbon-backed paper - Coated paper - Onion skin or thin paper - Wrinkled or creased paper - Curled or rolled paper