Samsung SCX 6322DN Service Manual - Page 77
Main PBA
UPC - 635753620658
View all Samsung SCX 6322DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
5.18 Main PBA To remove the Main PBA without major disassembly 1. Before you remove the Main PBA, you should remove: - Rear Cover (see page 5-1) Goto Step 4 In order to remove the Shield Main Lower you must also remove: - Scanner Ass'y (see page 5-2) - Cover Paper Exit Ass'y(see page 5-15) - SMPS (see page 5-17) 2. Remove the three frame screws and 2 ground wire screws. Take out the Shield Main taking care to ease the power socket from the LH frame. Shield Main Lower 4. Remove the ten screws securing the connect screw. Take out the Main PBA and HVPS from the Shield Main Lower. HVPS Shield Main Lower Main Board 5. If fitted release the plastic support securing the network card to the Main PBA and HVPS. HVPS Network Coard 3. Remove the two screws securing the connect screw. Take out the Modular Jack PBA from the Shield Main Lower. Shield Main Lower Harness Modular Jack PBA Samsung Electronics Service Manual 5-23