Samsung SCX 6322DN Service Manual - Page 98
Poor Fusing Grade
UPC - 635753620658
View all Samsung SCX 6322DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Poor Fusing Grade Troubleshooting After printing NO completed, any error related fuser? YES The machine placed under the NO severe low tempera ture for a long time? YES While printing, the voltage of pin 60 NO of U36 (CPU) on Main PBA is 2.1V - 2.6V? YES Thermistor's NO contact is OK? YES Both ends NO of thermostat open? YES Place the machine at normal temperature and re-test Replace thermostat and re-test Re-assemble thermistor Open the top cover. When black NO printing, is the fuser NIP width is 3.03.5mm? Check if the hardness of P/R, and spring force is OK? (hardness: 24 degree, spring's force: 3 Kg) YES Replace the control component on Main PBA Check any contact problem in thermistor and repair The paper used is too thick or contains too much cotton in it -> Re-test with the recommended paper Samsung Electronics Service Manual 6-21