Samsung SMX-F34SN User Manual (user Manual) (ver.1.0) (English) - Page 100
connecting to a PC
View all Samsung SMX-F34SN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
connecting to a PC ✪ This chapter explains how to connect a PC using the USB cable for various actions. - To connect an USB cable to a PC, refer to the software installation instructions and available PC specification. TRANSFERRING A RECORDED FILE THROUGH A USB CONNECTION • The camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification) • You can transfer a recorded file on a storage media to your PC via a USB connection. USB Connection Speed depending on the System • High speed USB connection is supported by Microsoft (Windows) device drivers only. • Windows 2000 - High speed USB on a system with Service Pack 4 or later installed. • Windows XP - High speed USB on a system with Service Pack 1 or later installed. • Windows VISTA - High speed USB on a system with Service Pack 1 or later installed. Cyberlink MediaShow4 System Requirements The following requirements must be satisfied to use CyberLink MediaShow4. CPU OS (Operating System) RAM Intel® Pentium ®4, at least 3.0 GHz/AMD recommended Windows Vista or XP (Windows XP Service Pack 2) * Standard installation is recommended. Operation may not assured if the above OS has been upgraded. 512MB (1 GB and above recommended) Resolution 800 x 600, 16-bit color or higher USB VGA USB2.0 High Speed Intel® 945GM or faster NVIDIA Geforce 6600 or higher ATI Radeon X1600 or higher - On a low performance graphics system, running the MediaShow4 may cause error or not apply some of animation effects. Miscellaneous Internet Explorer 5.5 or later DirectX 9.0 or later DVD+R/RW, DVD-R/RW Supported media For the compatible DVD/CD burners, refer to CyberLink web site: http://www.gocyberlink.com/english/products/powerproducer/2_gold/comp_dvd_drives.jsp English_90