Sanyo PDG-DHT8000L Owners Manual

Sanyo PDG-DHT8000L - 8000 Lumens Manual

Sanyo PDG-DHT8000L manual table of contents:

  • Sanyo PDG-DHT8000L | Owners Manual - Page 1
    Multimedia Projector MODEL PDG-DHT8000L ✽ Projection lens not included. Owner's Manual
  • Sanyo PDG-DHT8000L | Owners Manual - Page 2
    ... and maintains lamp life (p.57). ◆ Active Maintenance Filter The projector monitors the condition ... Lamp and filter maintenance functions provide for better and proper maintenance of the projector. ...and set-up the projector remotely via network. For details, refer to the owner's manual "Network ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 3
    ... Moving the Projector   4 5 6 7 8 Computer Input 5 Computer System Selection Auto PC Adjustment Manual ... Troubleshooting Menu Tree Indicators and Projector Condition Compatible Computer Specifications Supported... Control Remote Control Code Lens Installation Positioning Projector Picture Level and...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 4
    ...the "Troubleshooting" section in the back of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. Safety ...can reduce the service life of your projector, and can also be dangerous. SIDE and TOP REAR 1.5' (50cm...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 5
    ... retain them for later use. Unplug this projector from AC power supply before cleaning... by persons walking on it. Do not attempt to service this projector yourself as opening or removing covers... the projector near the ventilation duct of airconditioning equipment. NOTE FOR CUSTOMERS IN THE US Hg LAMP...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 6
    ... bottom vent. Cooling fans are provided to cool down the projector. The fans' running speed is changed according to the temperature inside the projector. The projector uses a lamp which generates significant heat. The cooling fans and air vents ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 7
    ... Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project... set the ceiling function to "On. (pp.41, 45) " •The projector cannot be operated at an altitude above 3,000 ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 8
    ...case. -Do not transport the projector by courier or any other transport service in an unsuitable transport.... For information about transporting the projector by courier or any other transport service, consult your dealer... the projector by one person, grip handles and carry it with lens side up. Then...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 9
    ...if not installed and used in accordance with the instruction manual, may cause harmful interference ... cause radio interference in which case the user may be required to take adequate measures.... Requirement The AC Power Cord supplied with this projector meets the requirement for use in the country you ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 10
    ... Main On/Off Switch o Power Cord Connector !0 Lamp Cover ✽Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector. *Kensington is a registered trademark of ACCO Brands ...Receiver (Rear) !2 Air Intake Vent !3 Air Filter Cover !4 Exhaust Vent CAUTION Hot ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 11
    ...USB CONNECTOR (Series B) USB connector is used to service the projector. w 5 BNC INPUT jACKS Connect ...SERIAL PORT IN TERMINAL If you control the projector through RS-232C from a computer, you ... IN of another projector to this terminal. !0 LAN port Connecting the Ethernet cable. See the owner's manual ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 12
    ... Control q w e r t !0 o i y !1 u q ON/STAND-By button w SHUTTER button !2 Turn the projector on or off. (pp.24,25) Close and ... button Light the side control and around terminals. (p.28) o LENS SHIFT button Select the LENS SHIFT function. (p.28) !0 INPUT button Select an input source Input 1, Input ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 13
    ... Management mode. (pp.57 79-81) , w LAMP Indicator This indicator is dim when the projector is turned on. And bright when the projector is...) e WARNING TEMP indicator . This indicator flashes red when internal projector temperature is too high. (pp.72, 79-81) r WARNING FILTER indicator -Blink slow ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 14
    ... Functions Remote Control e w q q ON/STAND-By button Turn the projector on or off. (pp.24-25) w AUTO ... MENU. (p.26) -Pan the image in DIGITAL ZOOM +/- mode. (p.41) y LENS SHIFT button Select .... (pp.31, 41, 45) o !0 !1 !2 !3 !9 @0 @1 !3 FILTER button Scroll the filter. (p.31) !4 SHUTTER button ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 15
    ... receivers. (pp.10, 56) 16.4' (5 m) ✔Note: •When hanging the projector from the ceiling, select the Infrared Remote Receiver which is located farther away from the fluorescent light. (p.56) •When using the projector in the horizontal position without hanging from the ceiling, it is ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 16
    ... the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote controlମ.
  • Sanyo PDG-DHT8000L | Owners Manual - Page 17
    ... ✔Note: •When the lens is not installed properly, 'Lens incorrectly fitted!' message appears on the screen. Positioning Projector This projector is designed to project on a flat projection surface. ✔Note: SCREEN •Brightness in room ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 18
    ...side and up and down with the motor-driven lens shift function. This function makes the positioning of... position Shift range Shift range For optional lens LNS-S50/ W50/W51/ T50/ ... lens LNS-S51 : A=5%, B=15% LNS-W53 : A=3%, B=8% ✽ When the lens is shifted beyond the described range of operation, ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 19
    ... Terminals of Projector The projector has two replaceable Interface board slots. The projector's functions..., contact sales dealer where you purchased the projector. INPUT/OUTPUT TERMINALS 2 TERMINAL SLOTS... of replacement of interface board, turn off the projector, press the Main On/Off Switch to Off...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 20
    ... is supplied; Other cables are not supplied with this projector.) Laptop type Desktop type Monitor ...HV V ANALOG MONITOR OUT DIGITAL HDMI Terminals of the projector Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. v See the next...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 21
    ... DVI Cable • S-Video Cable • HDMI Cable ( Cables are not supplied with the projector.) Monitor Out Signal Table Input Terminal RGB (PC analog) ...VIDEO Y-Pb/Cb-Pr/Cr ANALOG MONITOR OUT DIGITAL HDMI Terminals of the projector Unplug the power cords of both the projector and external equipment...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 22
    Installation Attaching the Cable Tie You can dress and secure all cables to a cable tie (supplied). The cable tie is reusable and can be opened and closed as many times as needed. Cable tie To loosen the cable tie Tab Cable tie Pull the tab in the arrow direction and loosen the cable tie. 
  • Sanyo PDG-DHT8000L | Owners Manual - Page 23
    ... of power being supplied, consult your authorized dealer or service center. Connect the projector with all peripheral equipment before turning on ...side For Continental Europe For the U .K . Ground To POWER CORD CONNECTOR on your projector. To the AC Outlet. (10 V AC) To the AC Outlet. (00-40 ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 24
    ...last time and the Lamp status icon (see page 67) appear on the screen. If the projector is... may appear on the screen depending on the usage state of the projector. • If the filter cartridge is not installed in the projector, the Warning Filter indicator does not light up and the Filter warning icon...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 25
    ...control or on the remote control again to turn off the projector. The LAMP indicator lights bright and the POWER indicator turns off. After the projector is turned off, the cooling fans operate.... 4 seconds. 3 4 TO MAINTAIN THE LIFE OF THE LAMP ONCE YOU , TURN THE PROJECTOR ON, WAIT AT LEAST FIVE...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 26
    Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. Side Control 1 2 3 Press the MENU button on the side control or the remote...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 27
    ... input source information (p.29). !0 Network Menu See the owner's manual "Network Set-up and Operation" . For Video Source q w e r t y u i o q Guide Window Show the ...input source information (p.29). o Network Menu See the owner's manual "Network Set-up and Operation" . 7...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 28
    ... button LIGHT button ZOOM button LENS SHIFT button FOCUS button POINT ... the SHUTTER button to close the shutter inside the projector. To open up the shutter, press the SHUTTER ... is "On" in the Setting menu. (p.60) • The SHUTTER indicator on the projector's top lights blue when the shutter is closed....
  • Sanyo PDG-DHT8000L | Owners Manual - Page 29
    .... values described in this figure may be different from the actual values. •SERIAL NO. is used to service the projector. •When the lamp life reaches a recommended lamp replacement time, the time shown in Lamp1 or Lamp2 turns red. •The total accumulated ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 30
    ...•See the next page for the description of other buttons. User 1 mode of PIP (example) D .ZOOM button Press ... See the previous page for details. Main picture User  mode of PIP (example) Sub picture PIP... mode of Picture in Picture appears. Each mode (User 1-5) appears only when it has stored data. ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 31
    ... FILTER button for more than five seconds to replace the filter mechanically. See page 56 for details. •... the filter is replaced, the total accumulated time of the filter use is automatically set to 0. ✔Note: IMAGE ADj . ..., see pp.46-48. P-TIMER button FILTER button KEySTONE button IMAGE SEL . ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 32
    Input Selection Input Side Control Side Control button operation INPUT button INPUT 1 INPUT button INPUT  INPUT  INPUT 4 Side Control Operation Press the INPUT button on the side control. It switches to INPUT 1, INPUT 2, INPUT 3 and INPUT 4 as you press the INPUT button. Before using the INPUT ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 33
    Input Selection Computer Input Source Selection Menu Operation When Selecting the INPUT 1 with DVI/D-sub 15 terminals 1 2 3 4 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the INPUT Menu icon. Use the Point ed buttons to move the ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 34
    ... of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP . •When a slot is empty, the input is displayed in grayout. 4...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 35
    ...computers need to be set manually.) One of the following messages may appear when: Auto When the projector cannot ...your computer and the projector. (See "Troubleshooting" on page 73.) The preset system is manually adjusted... in the projector and displays it. PC SySTEM MENU PC SySTEM MENU PC System...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 36
    ... parameters of the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be... Mode in PC SYSTEM Menu (p.35). See Manual PC Adjustment on pages 37-38..... When the image is not provided properly with this operation, manual adjustments are required. (pp.37-38.) ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 37
    ... may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you ... signal formats. The projector has 10 independent memory areas to store those manually adjusted ... 7 8 buttons to adjust the horizontal area displayed by this projector. Display area V Use the Point 7 8 buttons ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 38
    Computer Input Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Mode free To clear the adjusted data, select Mode free and then press the SELECT button. Move the red ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 39
    ... desired level and press the SELECT button. Normal picture level preset on the projector. Real Picture level with improved halftone for graphics. Dynamic For viewing contrasty images in a bright room. IMAGE 1-10 User preset picture adjustment in the Image Adjust Menu. (p.48) 9
  • Sanyo PDG-DHT8000L | Owners Manual - Page 40
    ... than the screen size (1920 x 1080), the projector enters to the panning mode automatically. Use ... is detected in the PC System Menu. (p.35) •The projector cannot display the resolution higher than ... than that, lower the resolution before connecting the projector. •The image data other than 1920 x...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 41
    ... is set to "On, the picture is top/bottom and " left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to "On, the picture is left/right " reversed. This function is used to project the image from the rear of the ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 42
    .../NTSC/NTSC4 .4/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from ... 1035i or 1080i, select the system manually. COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce proper video image, select a specific component video signal ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 43
    ...to the desired level and press the SELECT button. Normal picture level preset on the projector. Cinema Picture level adjusted with fine tone. Dynamic For viewing contrasty images in a bright room. IMAGE 1-10 User preset picture adjustment in the Image Adjust Menu. (p.48) 4
  • Sanyo PDG-DHT8000L | Owners Manual - Page 44
    ... left side of images naturally without changing the center areas. Full Provide the full screen image. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds. To display the Aspect ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 45
    ... is set to "On, the picture is top/bottom and " left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to "On, the picture is left/right " reversed. This function is used to project the image from the rear of the ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 46
    Picture Image Image Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 47
    Picture Image COLOR SELECTION MODE (continued) COLOR M . Return to the COLOR MANAGEMENT POINTER. (If you press the MENU button on the side control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.) MENU Return to the IMAGE ADJUST...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 48
    ... scan mode. " Off ...Progressive scan mode is "Off. " On ...Progressive scan mode is "On. Film ...For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Press the SELECT button at this icon to display the previous items. Press the ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 49
    ...setting is in this option. Countdown Off...Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off ...Hide the...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 50
    .... User ...The image you captured. Black...Black colored background. Lamp mode This projector ... light up, the LAMP 1/2 REPLACE indicator blinks orange and the projector will light the other.../2000H). ✔Note: • When either of the two lamps is out, the projector will light the other automatically even...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 51
    ...- 5) which you want to delete and press the SELECT button. Then the Confirmation box appears. To delete, select [Yes]. Store ...Store the adjusted data in the User 1-5. Use the Point 7 8 buttons to select Store and press the SELECT button to show the 'Where to store?' dialog box. Move the red ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 52
    Setting Edge blending This function allows multiple projector images to be seamlessly overlapped. Use the Point ed buttons to move .... Color matching Color matching When multiple sets are used simultaneously, this projector allows the user to correct the difference of colors among the sets. Use the ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 53
    ...Yellow/White. Menu off ...Close the menu temporarily. Quit ...Exit the Color matching menu. DynamicBlack DynamicBlackTM improves the black level of the projector. Black level is the darkest part of a picture and varies between viewing devices and environments. Set DynamicBlack Off/Low/High. Fig .1 ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 54
    ...only. Default . Show the factory-set logo. User ...Show the image you captured. Capture ... will . be displayed the next time you turn on the projector. To cancel the Capture function, select [No]...., the adjusted data is automatically reset and the projector captures an image without keystone correction...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 55
    Setting Logo PIN code lock This function prevents an unauthorized person from changing the screen logo. Off ...The screen logo can be changed freely from the Logo Menu. On ...The screen logo cannot be changed without a Logo PIN code. If you want to change the Logo PIN code lock setting, press the ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 56
    ... • If the filter cartridge is not installed in the projector, 'Filter control' is displayed in grayout. Fan control Choose the running speed of... control code also must be switched to "Code 7" , . To change the code for the projector; Select a remote control code in this Setting Menu. To change...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 57
    ..., the Power management function turns off the projection lamp when the projector is not used for a certain period. If the ..., the Power management function is released. On start When this function is set to "On, the projector will be " automatically turned on just by connecting the AC power cord ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 58
    ...control nearby and unable to operate the projector, contact the service center. Key lock PIN code lock This function prevents the projector from being operated by unauthorized persons and provides ... buttons and select [Yes] to activate it. When the projector is locked with a PIN code, the PIN code...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 59
    ... CAN NO LONGER BE STARTED . Projector ID Change the PIN code This feature allows users to set serial communication configuration (Projector ID) when several projectors are connected via the RS-232C terminal (serial port) of the projector. Use the Point 7 8 buttons to adjust the Projector ID...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 60
    ... control ...Selecting "On" prohibits the shutter operation from the remote control. Projector ...Selecting "On" prohibits the shutter operation from the side control. It ... The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 61
    ... camera. Use the Point 7 8 buttons to select from Auto or Manual 60.00Hz/59.94Hz/50.00Hz/.../ 23.98Hz). Auto ...Factory default setting. Manual xx.xx Hz .. Use the Point 7 ... frequency. When this item is adjusted, the above column will change to [Manual, - - -]. Reset ...Select 'Reset' and press the ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 62
    ...that the filter replacement is necessary. If the filter is out of scroll and the projector reaches a time set in the timer setting, Fig. 2 appears on the ... or during "Freeze" (p.30). • If the filter cartridge is not installed in the projector, 'Filter counter' is displayed in grayout...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 63
    Setting Test pattern Various test patterns are available for use when setting up the projector. Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, filter counter and filter ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 64
    ... may result in internal heat buildup and adversely affect the life of the projector. This projector has an electrically operated filter which helps you to replace the ... as possible (pp.31, 56). If the filter is out of scroll and the projector reaches a time set in the timer ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 65
    ... filter cartridge can be ordered through your dealer. When ordering, give the following information to the dealer. l Model No . of your projector PDG-DHT8000L l Replacement Filter Cartridge Type No . : POA-FIL-090 (Service Parts Code: 610 50 7811) 65
  • Sanyo PDG-DHT8000L | Owners Manual - Page 66
    ...below appears. 3 4 Off Select Reset and the "Filter counter Reset?" appears. Select [Yes],... appears. Select [Yes] again to reset the Filter counter. Resetting the Scroll Counter Be sure to reset the Scroll counter after replacing the filter cartridge. Scroll counter 1 2 3 4 Press the MENU ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 67
    ... lamp is defective or fails to be turned on. Restart the projector on, and make sure lamp is on. If this mark still appears, replace ... the 2 lamps is out, the projector operates with 1 lamp. The Lamp Mode can be switched to 2 lamps or 1 lamp manually. Refer to the SETTING section on page 50. 2 LAMP ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 68
    Maintenance and Care Lamp Replacement When the projection lamp of the projector reaches its end of life, the ...least 45 minutes before you open Lamp Cover. The inside of the projector can become very hot.... LAMP 2. CAUTION : DO NOT OPERATE THE PROjECTOR WHILE ANy OF LAMPS IS REMOVED . IT MAy RESULT IN ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 69
    ... Lamp, give the following information to the dealer. l Model No . of your projector l Replacement Lamp Type No . : : PDG-DHT8000L POA-LMP145 (Service Parts No. 610 350 6814) LAMP HANDLING PRECAUTIONS This projector uses a high-pressure lamp which must...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 70
    ...from the AC outlet. Let the projector cool for at least 45 minutes. Loosen a screw on the Lamp Cover. Slide and... color wheels!' message appears on the screen. SCREWS Allow the projector to cool, for at least 45 minutes before you open Lamp Cover. The inside of the projector can become very hot. ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 71
    ... and Care Cleaning the Projection Lens Turn off the projector, press the Main On/Off ... other harsh chemicals might scratch the surface of the lens. Cleaning the Projector Cabinet Turn off ... because the temperature inside the projector is extremely high due to the lamps. In addition, there is a risk ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 72
    ... will be automatically shut down to protect the inside of the projector. The LAMP indicator turns red brighter ... clean? Replace the filter with a new one. The projector is shut down; and the LAMP indicator ... shut down to protect the inside of the projector and the LAMP indicator lights on and other ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 73
    ... may need to be changed the setting for monitor output when connected to the projector. See your computer's instruction manual for the setting. - It takes about 20 seconds to display an image after turning on the projector. - See if the selected system is ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 74
    ... pages 64-65) appears on the screen - Adjust the focus of the projector. - Check Projection Lens to see if it needs cleaning. ✔... may result in moisture condensation on Projection Lens. In such cases, leave the projector OFF and wait until condensation evaporates. - Projecting from excessive ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 75
    ... work when the remote control cable is connected to the projector. (See page 15) - Check the status ... are used to operate this projector . Do not attempt to open the cabinet . If problems still... purchased the projector or the service center. Specify the model number and explain about the problem. We...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 76
    ...freq. Screen Language Lamp mode Lamp control Lamp interval Lamp 1 Lamp 2 Filter counter Power management...Key lock PIN code lock Remote Control Projector Effect Release key 5 - 480 Min BrilliantColor ...Menu Low Color M. Network Network Refer to the owner's manual "Network Set-up and Operation" ....
  • Sanyo PDG-DHT8000L | Owners Manual - Page 77
    Appendix Computer Input System (1) Mode 1 Mode 2 SVGA 1 SVGA 2 SVGA 3 ✽ System displayed in the System Menu varies depending on the input signal. Image Select Standard Real Dynamic Image 1 Image 10 PC Adjust Auto PC adj. Fine sync. Total dots Position H Position V Current mode H-sync freq. V-...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 78
    .../Menu size/Quit Off/Countdown Off/On Blue/User/Black 2-Lamps/Lamp1/Lamp2 ...Lamp life control Lamp interval Normal/Eco1/Eco2 Mode 1/Mode 2 Projector ID ...CC3/CC4 Color/White Remote control Projector On / Off Any / SHUTTER 5 - 480 Min....lock Security On/Off Key lock Off Projector Remote Control Off/On1/On2 ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 79
    ... LAMP red WARNING WARNING LAMP 1/2 SHUTTER TEMP . FILTER REP . blue red orange orange Projector Condition The projector is off. (The ...is in stand-by mode. Press the ON/ STAND-BY button to turn on the projector. The projector is operating normally. (The Shutter is open) The projector...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 80
    ... LAMP red WARNING WARNING LAMP 1/2 SHUTTER TEMP . FILTER REP . blue red orange orange Projector Condition The temperature.... When turning on the projector, the WARNING TEMP indicator stops . blinking. Check and replace the filter. The lamp cannot light up. (The projector is preparing for stand-by or ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 81
    ... filter scroll. The filter cartridge is removed while the projector is on. The projector is turned on without installing the filter cartridge, and then the filter cartridge is installed while the projector is on. The projector detects an abnormal condition and cannot be...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 82
    Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 230 MHz of Dot Clock. ON-SCREEN DISPLAy VGA 1 VGA 2 VGA 3 VGA 4 VGA 5 VGA 6 VGA 7 MAC ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 83
    ...other than above are inputted, however the functions of the projector could be limited. •Depending on your PC ...project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn .... •Do not disconnect the cable while the projector is running. If the cable has been...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 84
    Appendix Supported Signal Format for Optional Board When using the optional board (DVI) "POA-AMDADI", refer to the chart on the previous page. When using the optional board (Dual SDI) "POA-AMD17SDID" refer to the chart below. , ON-SCREEN DISPLAy 1035i RESOLUTION H-Freq .(kHz) V-Freq .(Hz) ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 85
    Appendix Technical Specifications Mechanical Information Projector Type Dimensions (W x H x D) Net Weight Feet Adjustment Multi-media Projector 15.75" x 9.55" x 20.61" (400.0 ... g) (including batteries) Accessories q Owner's Manual (CD-ROM) q Quick Reference Guide q AC Power Cord q ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 86
    Appendix l The specifications are subject to change without notice. l Each projector has its own characteristics. When projecting with several projectors on the same screen or side by side, you may recognize different white balance and color uniformity on each ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 87
    Appendix Configurations of Terminals ANALOG (Mini D-sub 15 pin) 5 15 USB CONNECTOR (Series B) 1   4 Vcc - Data + Data Ground 10 4 14 9 3 13 2 8 12 7 1 6 11 2 1 3 4 Input 1   4 5 6 7 8 Red Input Green Input Blue Input --Ground (Horiz. sync.) Ground (Red) Ground (Blue) Ground (Green) ...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 88
    ... below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service center. PIN Code Lock No. ... be changed, the factory set number will be invalid. While the projector is locked with the PIN code...Put the label below (...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 89
    Appendix Dimensions Unit: inch (mm) 0.28(7.0) 4.45(113.0) 9.21(234.0) 9.55(242.5) Screw Holes for Ceiling Mount Screw: M8 Depth: 0.393 (10.0) 6.81(173.0) 5.0º 15.75(400.0) 6.81(173.0) 2.64(67.0) 4.25(108.0) 12.48(317.0) 4.65(118.0) 6.02(153.0) 5.63(143.0) 20.47(520.0) 20.61(523.5) 96.0º...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 90
    ... serial cross cable to SERIAL PORT IN on the projector and serial port on the PC. (See ... Command Format The command is sent from PC to the projector with the format below; 'C' [Command] 'CR' Command:... characters (refer to the command table below. -The projector decodes the command and returns the 'ACK...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 91
    ... down Cooling down after the projector is turned off when the lamps are out. Stand-by mode ... down at the temperature anomaly. Cooling down when the projector is turned off by the shutter management function... show the typical command lists for controlling the projector. Please consult your local dealer...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 92
    ... shows the case when you use two projectors (Projector A and B).) Image A Image B Screen Projector A Projector B 3 Select 'Edge blending' in the setting menu and display the Edge blending ... line Image B • The blending widths of each projector (e.g., the right width of Image A and the left...
  • Sanyo PDG-DHT8000L | Owners Manual - Page 93
    ...] 8. Enter the values of Mesured-Green, Mesured-Blue, and Mesured-Half white in the same way as Mesured-Red. 9. Adjust the values of Target again. 10. Select 'Store' to complete. (Apply the same adjustment to the other projector if necessary.) Fig .1 For rich color reproduction color wheel 9
  • Sanyo PDG-DHT8000L | Owners Manual - Page 94
    KE2AL SANyO Electric Co ., Ltd .



Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Sanyo PDG-DHT8000L - 8000 Lumens Manual