Sanyo PDG-DHT8000L Owners Manual - Page 90

Serial Control Interface, Operation, Functional Execution Command

Get Sanyo PDG-DHT8000L - 8000 Lumens PDF manuals and user guides View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 90 highlights

Appendix Serial Control Interface This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port. Operation 1 Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial port on the PC. (See p.11) 2 Launch a communication software provided with PC and setup the communication condition as follows: 3 Type the command for controlling the projector and then enter the "Enter" key. Example When you want to change the input to INPUT 2, Type 'C' '0' '6' 'Enter'. Baud rate Parity check Stop bit Flow control Data bit : 9600 / 19200 bps : none : 1 : none : 8 ✔Note: •The default of the baud rate is set to 19200 bps. If an error occurs in the communication, change the serial port and the communication speed (baud rate). •Enter with ASCII 64-byte capital characters and onebyte characters. Functional Execution Command Format The command is sent from PC to the projector with the format below; 'C' [Command] 'CR' Command: two characters (refer to the command table below. -The projector decodes the command and returns the 'ACK' with the format below; 'ACK' 'CR' -When the projector cannot decode the command, it returns with format below. '?' 'CR' Command C00 C01 C05 C06 C07 C08 C0D C0E C0F C10 C1C C1D C3A Function Turn the projector ON Turn the projector OFF (immediately OFF) Select Input 1 Select Input 2 Select Input 3 Select Input 4 Video mute ON Video mute OFF Screen normal size Screen full size Menu ON Menu OFF Pointer RIGHT 90 Command C3B C3C C3D C3F C46 C47 C4A C4B C5D C5E C5F C60 C89 C8E C8F C90 C91 Function Pointer LEFT Pointer UP Pointer DOWN Enter Zoom DOWN Zoom UP Focus DOWN Focus UP Lens shift UP Lens shift DOWN Lens shift LEFT Lens shift RIGHT Auto PC Adj. Keystone UP Keystone DOWN Keystone RIGHT Keystone LEFT

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
90
Serial Control Interface
This projector provides a function to control and monitor the projector's operations by using the RS-232C serial
port.
Connect a RS-232C serial cross cable to SERIAL
PORT IN on the projector and serial port on the PC.
(See p.11)
Launch a communication software provided with PC
and setup the communication condition as follows:
1
2
3
Baud rate
: 9600 / 19200 bps
Parity check
: none
Stop bit
: 1
Flow control
: none
Data bit
: 8
Type the command for controlling the projector and
then enter the "Enter" key.
Example
When you want to change the input to INPUT 2,
Type 'C' '0' '6' 'Enter'.
✔
Note:
•The default of the baud rate is set to 19200 bps. If an
error occurs in the communication, change the serial
port and the communication speed (baud rate).
•±
Enter with ASCII 64-byte capital characters and one-
byte characters.
The command is sent from PC to the projector with
the format below;
'C' [Command] 'CR'
Command: two characters (refer to the
command table below.
-The projector decodes the command and returns the
'ACK' with the format below;
'ACK'
'CR'
-When the projector cannot decode the command, it
returns with format below.
‘?’
‘CR’
Format
Operation
Appendix
Functional Execution Command
Command
Function
C00
Turn the projector ON
C01
Turn the projector OFF
(immediately OFF)
C05
Select Input 1
C06
Select Input 2
C07
Select Input 3
C08
Select Input 4
C0D
Video mute ON
C0E
Video mute OFF
C0F
Screen normal size
C10
Screen full size
C1C
Menu ON
C1D
Menu OFF
C3A
Pointer RIGHT
Command
Function
C3B
Pointer LEFT
C3C
Pointer UP
C3D
Pointer DOWN
C3F
Enter
C46
Zoom DOWN
C47
Zoom UP
C4A
Focus DOWN
C4B
Focus UP
C5D
Lens shift UP
C5E
Lens shift DOWN
C5F
Lens shift LEFT
C60
Lens shift RIGHT
C89
Auto PC Adj.
C8E
Keystone UP
C8F
Keystone DOWN
C90
Keystone RIGHT
C91
Keystone LEFT