Sanyo PLC XE40 Owners Manual - Page 14
Installation, Positioning the Projector, Adjustable Feet - throw ratio
View all Sanyo PLC XE40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set horizontally to the flat screen. ✔Note: • This projector is not equipped with optical zoom. To adjust the screen size, change the throw distance. • The brightness in the room has a great influence on picture quality. It is recommended to limit the ambient lighting in order to get the best image. • The values below are approximate and may vary from the actual sizes. A : B = 10 : 1.2 3.38' (1.03m) 3.28' (1.00m) 2.92' (0.89m) 2.66' (0.81m) 70" 2.49' (0.76m) 64" 60" (Inch Diagonal) 80" 78" A B (Center) Screen Size (W x H) mm 4 : 3 aspect ratio Throw distance 60" 1219 x 914 2.49' (0.76m) 64" 1300 x 975 2.66' (0.81m) 70" 1422 x 1067 2.92' (0.89m) 78" 1585 x 1189 3.28' (1.00m) 80" 1626 x 1219 3.38' (1.03m) Adjustable Feet Projection angle can be adjusted up to 10.0 degrees with the adjustable feet. 1 Lift the front of the projector and pull upward the feet lock latches on both sides of the projector. 2 Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to adjust the position and tilt. 3 To retract the adjustable feet, lift the front of the projector and pull and undo the feet lock latches. Keystone distortion of the projected image can be corrected by menu operation. (pp. 23, 42) Adjustable Feet Feet Lock Latches 14