Sanyo PLC XE40 Owners Manual - Page 6
Air Circulation, Installing the Projector in Proper Position, Moving the Projector - replacement lamp
View all Sanyo PLC XE40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. - Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes. -Keep the exhaust vent at least 3'(1m) away from any objects. -Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area will become hot while the projector is being used. -Do not put anything on the cabinet. The materials put on the cabinet will not only get damaged but also cause fire hazard by heat. Cooling fans are provided to cool down the projector. The fans' running speed is changed according to the temperature inside the projector. Exhaust Vent (Hot air exhaust) Installing the Projector in Proper Position Install the projector properly. Improper Installation may reduce the lamp life and cause a fire hazard. 20˚ Do not tilt the projector more than 20 degrees from side to side. 20˚ Do not point the projector up to project an image. Do not point the projector down to project an image. Do not put the projector on either side to project an image. Moving the Projector When moving the projector, replace the lens cover and retract the adjustable feet to prevent damage to the lens and cabinet. When the projector is not in use for an extended period, put it into a suitable case to protect the projector. When handling the projector, do not drop, bump, subject it to strong forces or put other things on the cabinet. Exhaust Vent (Hot air exhaust) Air Intake Vent USE CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR - Do not drop or bump the projector, otherwise damages or malfunctions may result. - When carrying the projector, use a suitable carrying case. - Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to the projector. To transport the projector through a courier or transport service, consult your dealer for their information. - Do not put the projector in a case before the projector is cooled enough. Air Intake Vent 6