Sanyo PLC XE40 Owners Manual - Page 51
Settings, Chang, e the PIN, Reset the set, tings
View all Sanyo PLC XE40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Antitheft Alarm Function Antitheft Alarm Function Settings Change the PIN code 1 Press the F button and enter the four-digit PIN code within about 10 seconds. The ALARM indicator blinks red for a few seconds and high-pitched confirmation sound is made. 2 While the indicator is blinking, enter new PIN code then you will hear the high-pitched confirmation sound and the ALARM indicator is off. When typing an incorrect PIN code, you will hear lowpitched sound. If you enter incorrect PIN codes 3 times, the alarm starts ringing. A PIN code for Antitheft alarm function is the combination of 1, 2, or 3. Enter the PIN code with the button 1, 2, and 3. The default PIN code is set as "1111". Reset the settings Select Factory default in the Setting menu to reset the settings for the Antitheft alarm function. ✔Note: • This is effective only when the Antitheft alarm setting is released. • You can make some more detailed settings. (p. 48) CAUTION: WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN THE NEW PIN CODE AND KEEP IT SECURELY. IF YOU FORGET YOUR PIN CODE, SOME SETTINGS OF THE ALARM FUNCTION CAN NO LONGER BE CHANGED. Side Control ALARM indicator F button button 1, 2, 3 51