Sanyo PLC XE40 Owners Manual - Page 23
Focus Adjustment, Keystone Correction - turn on without remote
View all Sanyo PLC XE40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Focus Adjustment Adjust lens focus with the Focus lever. Basic Operation Focus Lever Keystone Correction If a projected picture has keystone distortion, correct the image with Keystone adjustment. Press the KEYSTONE button on the remote control. The keystone dialog box appears. Correct keystone distortion by pressing the Point ed buttons. Keystone adjustment can be memorized. (p. 42) Reduce the upper width with the Point e button. Reduce the lower width with the Point d button. • The arrows are white when there is no correction. • The direction of the arrow which are being corrected turns red. • The arrows disappear at the maximum correction. • If you press the KEYSTONE button on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment is canceled. • The adjustable range can be limited depending on the input signal. • The projected picture may fluctuate momently depending on the keystone adjustment. Remote Control KEYSTONE button POINT ed buttons Basic Operation 23