Sanyo PLC XE40 Owners Manual - Page 40

Video Input Sharpness Press the Point 7 button to soften the image and the Point 8 button to sharpen the image. (From 0 to 15.) Gamma Press the Point 7 8 buttons to get better balance of contrast. (From 0 to 15.) Noise reduction Noise interference on the screen can be reduced. Select one of the following to get smoother images. Off...........disabled. L1............lower reduction L2............higher reduction Progressive Interlaced video signal can be displayed in a progressive picture. Select one of the following. Off...........Disabled. L1............Select "L1" for an active picture. L2............Select "L2" for a still picture. Film........Select "Film" for watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select "Reset" and press the SELECT button. The confirmation box appears and then select "Yes". All adjustments return to their previous figures. Store To store the adjusted data, select "Store" and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. The confirmation box appears and then select "Yes". Stored data can be called up by selecting "Image" in the Image Level Selection on p. 38. Quit Exit the Image Adjust Menu. ✔Note: • Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected. (p. 37) 40 Store item Image Level Menu Move the red framed pointer to an image item to be set and then press the SELECT button. The confirmation box appears and then select "Yes".