Sanyo PLC XE40 Owners Manual - Page 25

Basic Operation AUTO PC button Press the AUTO PC button to operate the Auto PC function. For more detail, see p. 28. D.ZOOM buttons Press the D.ZOOM buttons to zoom in and zoom out the images. For more detail, see p. 34. NO SHOW button Press the NO SHOW button to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as "User" in the Logo selection (p. 43), the screen changes each time you press the NO SHOW button as follows. black out ➜ the captured image ➜ normal KEYSTONE button For detail, see p. 23. IMAGE button Press the IMAGE button to select an image level of the screen. For more detail, see pp. 31, 38. P-TIMER button Press the P-TIMER button. The timer display "00 : 00" appears on the screen and the timer starts to count time (00 : 00 ~ 59 : 59). To stop the P-Timer, press the P-TIMER button. Press the P-TIMER button again, then the P-timer display disappears. LAMP CONTROL button Press the LAMP CONTROL button to select the lamp mode for changing the brightness of the screen. Normal ....Normal brightness Auto ........Brightness according with the input signal Eco ..........Lower brightness reduces the lamp power consumption and extends the lamp life. Remote Control VOLUME +/- buttons (See p. 24) AUTO PC button D.ZOOM buttons KEYSTONE button (See p. 23) POINT ed buttons IMAGE button P-TIMER button NO SHOW button LAMP CONTROL button ✔Note: • See the previous page for the other buttons. The message disappears after 4 seconds. P-Timer display Basic Operation 25