Sanyo PLC XE40 Owners Manual - Page 47

Setting Setting Security (Alarm and PIN code lock settings) This function allows you to use PIN code lock and Alarm function to set the security for the projector operation. PIN code lock This function prevents the projector from being operated by an unauthorized person and provides the following settings for security options. Off........The projector is not locked with the PIN code. On1 .....Require to enter the PIN code every time turning on the projector. On2 ......Require to enter the PIN code to operate the projector once the power cord is disconnected; as long as the AC power cord is connected, the projector can be operated without the PIN code. Whenever to change the PIN code lock setting or the PIN code (the four-digit number), you are required to enter the PIN code. "1234" is set as the initial PIN code at the factory. Enter a PIN code Select a number by pressing the Point 7 8 buttons and fix the number with the SELECT button. The number changes to "✳". If you fixed an incorrect number, move the pointer to "Set" or "Clear" once by pressing the Point d button, then return to "PIN code". Enter the correct number again. Repeat this step to complete entering a four-digit number. When the four-digit number is fixed, the pointer automatically moves to "Set". Press the SELECT button so that you can change the following PIN code lock settings. If you entered an incorrect PIN code, "PIN code" and the number turn red and disappear. Enter a correct PIN code all over again. To Change the PIN code lock setting Select Off, On1, or On2 with the Point 7 8 buttons and then move the red framed pointer to "Quit" with the Point d button. Press the SELECT button to close the dialog box. PIN code lock When the projector is locked with the PIN code, the PIN code lock mark appears on the menu bar. Enter a PIN code Quit Pointer The input numbers change to "✳" for security. When the pointer automatically moves to "Set", press the SELECT button. 47