Sanyo PLC XE40 Owners Manual - Page 30
Display area H, Reset, Store, Mode free, To store adjusted data, Exit the PC Adjust Menu.
View all Sanyo PLC XE40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Computer Input Display area H Adjust the horizontal area displayed by this projector. Press the Point 7 8 buttons to decrease/increase the value. Display area V Adjust the vertical area displayed by this projector. Press the Point 7 8 buttons to decrease/increase the value. Reset To reset the adjusted data, select Reset and press the SELECT button. The confirmation box appears and then select "Yes". All adjustments return to their previous figures. Mode free To clear the stored data, move the red framed pointer to the "Mode free" and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button. Store To store adjusted data, move the red framed pointer to the "Store" and then press the SELECT button. Move the red arrow pointer to any of Mode 1 to 5 in which you want to store and then press the SELECT button. Quit Exit the PC Adjust Menu. ✔Note: • Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu (p. 27). Move the red framed pointer to an item and press the SELECT button. To clear adjusted data This Mode has stored parameters . Vacant Mode Values of "Total dots," "Horizontal," "Vertical," "Display area H," and "Display area V." To store adjusted data Close this dialog box. 30