Schwinn 230 Recumbent Bike 2020 model Service Manual - Page 15
Schwinn 230 Recumbent Bike 2020 model Manual
View all Schwinn 230 Recumbent Bike 2020 model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
7. To test the Drive Belt tension: • Push the Drive Belt downward at the midpoint (M) between the pulleys and measure the distance. The Drive Belt should have only 0.25" (0.64cm) of give. See Figure 1. Figure 1 Or: • Hold the edges of the Drive Belt at the midpoint (M) and twist it (see Figure 2). It should turn only 90 degrees } 0.604.2c5m" M (1/4 turn, to vertical). If the tension is correct, go to Step 15. If the tension is too loose or too tight, adjust the position of the Flywheel. Continue to the next step. M (Main Frame bracket not shown for clarity) Figure 2 15
15
7.
To test the Drive Belt tension:
•
Push the Drive Belt downward at the midpoint (M) between the
pulleys and measure the distance. The Drive Belt should have only
0.25” (0.64cm) of give.
See Figure 1.
Or:
•
Hold the edges of the Drive Belt at the midpoint (M) and twist it (see
Figure 2). It should turn only 90 degrees
(1/4 turn, to vertical).
If the tension is correct, go to Step 15.
If the tension is too loose or too tight, adjust the position of the Flywheel.
Continue to the next step.
M
M
0.25”
0.64 cm
}
(Main Frame bracket not shown for clarity)
Figure 1
Figure 2