Schwinn 230 Recumbent Bike 2020 model Service Manual - Page 92

To remove the Rear Shrouds:.

Get Schwinn 230 Recumbent Bike 2020 model PDF manuals and user guides View all Schwinn 230 Recumbent Bike 2020 model manuals
Add to My Manuals
Save this manual to your list of manuals

Page 92 highlights

7. Using a #2 Phillips Screwdriver, remove the 2 screws that secure the Right Main Shroud. Slowly remove the Right Main Shroud. Set the hardware and Shroud safely aside for reassembly. To remove the Rear Shrouds:. 8. Remove the Front and Rear Top Caps: Bend the edges of the Top Caps to disengage the inside tabs from the Main Assembly, and remove. Set the Top Caps safely aside for reassembly. 9. Using a #2 Phillips Screwdriver, remove the screws (indicated) that secure the Left Rear Shroud. Remove the bottom screws first, and then the top screws. Slowly remove the Left Shroud. Set the hardware and Left Shroud safely aside for reassembly. 10. Using a #2 Phillips Screwdriver, remove the screws that secure the Right Rear Shroud. Slowly remove the Right Shroud. Set the hardware and Right Shroud safely aside for reassembly. 11. Installation is the reverse procedure. Put the Left Shroud in position first to align the screws for the Right Shroud. Install the top screws first. Note: Self-tapping screws attach the Shrouds to the Frame. NOTICE: B e sure not to pinch or cut any cables. Be sure the tabs in the Top Shroud snap into the Main Assembly. 92

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
92
10.
Using a #2 Phillips Screwdriver, remove the screws that secure the
Right Rear Shroud. Slowly remove the Right Shroud. Set the hardware
and Right Shroud safely aside for reassembly.
11.
Installation is the reverse procedure. Put the Left Shroud in position
first to align the screws for the Right Shroud. Install the top screws first.
Note:
Self-tapping screws attach the Shrouds to the Frame.
NOTICE:
Be sure not to pinch or cut any cables. Be sure the tabs in
the Top Shroud snap into the Main Assembly.
7.
Using a #2 Phillips Screwdriver, remove the 2 screws that secure
the Right Main Shroud. Slowly remove the Right Main Shroud. Set the
hardware and Shroud safely aside for reassembly.
To remove the Rear Shrouds:.
8.
Remove the Front and Rear Top Caps: Bend the edges of the Top
Caps to disengage the inside tabs from the Main Assembly, and remove.
Set the Top Caps safely aside for reassembly.
9.
Using a #2 Phillips Screwdriver, remove the screws (indicated) that
secure the Left Rear Shroud. Remove the bottom screws first, and then
the top screws. Slowly remove the Left Shroud. Set the hardware and Left
Shroud safely aside for reassembly.