Schwinn 230 Recumbent Bike 2020 model Service Manual - Page 82

the Top Shroud snap into the Main Assembly.

Get Schwinn 230 Recumbent Bike 2020 model PDF manuals and user guides View all Schwinn 230 Recumbent Bike 2020 model manuals
Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

13. Installation is the reverse procedure. NOTICE: B e sure not to pinch or cut the cables. Hand tighten all hardware first, then fully tighten it. Put the Left Shroud in position first to align the screws for the Right Shroud. Install the top screws first. Note: S elf-tapping screws attach the Shrouds to the Frame. NOTICE: B e sure not to pinch or cut the cables. Be sure the tabs in the Top Shroud snap into the Main Assembly. Hand tighten all hardware first, then fully tighten it. Be sure the cables are tucked inside the Top Cap. 14. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. 82

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
82
13.
Installation is the reverse procedure.
NOTICE:
Be sure not to pinch or cut the cables. Hand tighten all
hardware first, then fully tighten it.
Put the Left Shroud in position first to align the screws for the Right
Shroud. Install the top screws first.
Note:
Self-tapping screws attach the Shrouds to the Frame.
NOTICE:
Be sure not to pinch or cut the cables. Be sure the tabs in
the Top Shroud snap into the Main Assembly.
Hand tighten all hardware first, then fully tighten it. Be sure
the cables are tucked inside the Top Cap.
14.
Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.