Schwinn 230 Recumbent Bike 2020 model Service Manual - Page 37

Installation is the reverse procedure.

Get Schwinn 230 Recumbent Bike 2020 model PDF manuals and user guides View all Schwinn 230 Recumbent Bike 2020 model manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Disconnect all power to the machine before you service it. Note: Your machine may not match the image. For reference only. 1. Remove the four screws that attach the Console to the Mast. Carefully lift the Console off the Mast. X4 2. Disconnect the Data Cable and Heart Rate Cable from the back of the Console, and remove it. Note: Do not pinch or cut the cables. Do not let the cables fall down inside the Mast. This step may require two people. 3. Installation is the reverse procedure. Note: D o not pinch or cut the cables. Align the clips on the cable connectors and make sure the connectors lock. X4 4. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
37
Disconnect all power to the machine before you service it.
Note:
Your machine may not match the image. For reference only.
1.
Remove the four screws that attach the Console to the Mast. Carefully
lift the Console off the Mast.
2.
Disconnect the Data Cable and Heart Rate Cable from the back of the
Console, and remove it.
Note:
Do not pinch or cut the cables. Do not let the cables fall down
inside the Mast. This step may require two people.
3.
Installation is the reverse procedure.
Note:
Do not pinch or cut the cables. Align the clips on the cable
connectors and make sure the connectors lock.
X4
X4
4.
Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.