Schwinn 230 Recumbent Bike 2020 model Service Manual - Page 71

Shroud. Discard the old Power Inlet assembly.

Get Schwinn 230 Recumbent Bike 2020 model PDF manuals and user guides View all Schwinn 230 Recumbent Bike 2020 model manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

7. Loosen and remove the thin Nut from the Power Inlet (C) on the outside of the Shroud. C 8. Pull the Power Inlet plug (A) out of the hole toward the inside of the Shroud. Discard the old Power Inlet assembly. 9. Installation is the reverse procedure. NOTICE: Do not pinch or cut the cables. Be sure the Power Inlet plug is seated evenly in the hole. A 10. Installation is the reverse procedure. Put the Left Shroud in position first to align the screws for the Right Shroud. Install the top screws first. Note: Self-tapping screws attach the Shrouds to the Frame. NOTICE: Do not pinch or cut the cables. Be sure the tabs in the Top Shroud snap into the Main Assembly. 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
71
7.
Loosen and remove the thin Nut from the Power Inlet (C) on the
outside of the Shroud.
8.
Pull the Power Inlet plug (A) out of the hole toward the inside of the
Shroud. Discard the old Power Inlet assembly.
9.
Installation is the reverse procedure.
NOTICE:
Do not pinch or cut the cables. Be sure the Power Inlet
plug is seated evenly in the hole.
10.
Installation is the reverse procedure. Put the Left Shroud in position
first to align the screws for the Right Shroud. Install the top screws first.
Note:
Self-tapping screws attach the Shrouds to the Frame.
NOTICE:
Do not pinch or cut the cables. Be sure the tabs in the Top
Shroud snap into the Main Assembly.
A
C