Schwinn 230 Recumbent Bike 2020 model Service Manual - Page 62
to the Heart Rate Cable from the Main Frame.
View all Schwinn 230 Recumbent Bike 2020 model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
6. Tie a length of string to the end of the old Heart Rate Cable at the base of the Console Mast. Hold the other end of the old Heart Rate Cable and carefully pull it out of the Console Mast so that the string extends through the length of the Console Mast. Untie the string and discard the old Heart Rate Cable. NOTICE: H old the Data Cable so that you do not pull it out of the Mast. Do not pinch or cut the Data cable. 7. Tie the end of the string at the base of the Console Mast to appropriate end of the replacement Heart Rate Cable. Hold the other end of the string and carefully pull the new Heart Rate Cable through the Console Mast. NOTICE: H old the Data Cable so that you do not pull it out of the Mast. Do not pinch or cut the cables. 8. Untie the string from the new Heart Rate Cable, and connect the cable to the Heart Rate Cable from the Main Frame. . NOTICE: D o not pinch or cut the cables. This step may require two people. 9. Put the Console Mast (with the Upper Shroud) back in position in the Main Frame, and reinstall the Hardware. Note: D o not let the cables fall down inside the Console Mast. NOTICE: B e sure not to pinch or cut any cables. This step may require two people. 10. Slide the Upper Shroud back into position and reinstall the Shroud Cap. NOTICE: B e sure the tabs in the Upper Shroud snap into the Main Assembly. X4 6mm 62