Schwinn 230 Recumbent Bike 2020 model Service Manual - Page 81
and disconnect the Heart Rate Cables. Set the Seat Rail Assembly safely
View all Schwinn 230 Recumbent Bike 2020 model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
10. Using a #2 Phillips screwdriver, remove the screws that secure the Right Rear Shroud. Slowly remove the Right Shroud. Set the hardware and Right Shroud safely aside for reassembly. 11. Using a 6mm hex wrench, loosen and remove the indicated hardware from both sides of the Seat Rail. Set the hardware safely aside. 12. Carefully remove the Seat Rail Assembly slightly from the Frame, and disconnect the Heart Rate Cables. Set the Seat Rail Assembly safely aside. NOTICE: D o not pinch or cut any cables. This step may require two people. 81
81
10.
Using a #2 Phillips screwdriver, remove the screws that secure the
Right Rear Shroud. Slowly remove the Right Shroud. Set the hardware
and Right Shroud safely aside for reassembly.
11.
Using a 6mm hex wrench, loosen and remove the indicated hardware
from both sides of the Seat Rail. Set the hardware safely aside.
12.
Carefully remove the Seat Rail Assembly slightly from the Frame,
and disconnect the Heart Rate Cables. Set the Seat Rail Assembly safely
aside.
NOTICE:
Do not pinch or cut any cables. This step may require two
people.