Schwinn 230 Recumbent Bike 2020 model Service Manual - Page 24

TM Replace the Belt Tensioner Assembly (Idler Assembly) on the Schwinn™ 130 / 510U and 230 / 510R Bikes Replacement Procedure Skill Level: II 8027934.020122.A NOTICE: This document provides instructions for the replacement of the Belt Tensioner Assembly (Idler Assembly) on the Schwinn™ 130 / 510U Upright Bikes and 230 / 510R Recumbent Bikes. If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside US/Canada). To find your local distributor, go to: www.nautilusinternational.com This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings on this machine. Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. www.nautilusinternational.com | Printed in China | © 2022 Nautilus, Inc. | Schwinn and the Schwinn logo are trademarks owned or licensed by Nautilus, Inc., registered or otherwise protected by common law in the United States and other nations. | ORIGINAL DOCUMENT - ENGLISH VERSION ONLY Important Safety Instructions - Before servicing or using this equipment, obey the following warnings: This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings on this machine. Disconnect all power to the machine before you service it. • Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause injury to the service technician or bystanders. • Keep bystanders and children away from the product being serviced at all times. • Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders. • Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these components. Do not try to do heavy or awkward steps on your own. • If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty. • Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased in US/Canada, contact Customer Service for replacement labels. If purchased outside US/Canada, contact your local distributor for them. • Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety. • Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance. • SAVE THESE INSTRUCTIONS. Tools Required (not included) #2 Phillips screwdriver Needlenose pliers Small flathead screwdriver 13mm open end wrench Pedal wrench or 15mm open end wrench Safety goggles or other eye protection Tape or marking pen 6mm hex wrench 24