Schwinn 230 Recumbent Bike 2020 model Service Manual - Page 56
Right Shroud. Slowly remove the Right Main Shroud. Set the hardware
 |
View all Schwinn 230 Recumbent Bike 2020 model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
6. Using a #2 Phillips Screwdriver, remove the 6 screws (indicated) that secure the Left Shroud. Remove the bottom screws first, and then the top screws. Slowly remove the Left Shroud. Set the hardware and Shroud safely aside for reassembly. Note: Find the Power Inlet (A) in the Left Shroud. Disconnect the Power Inlet cable (A1) from the wiring harness (B). NOTICE: Do not pinch or cut the cables. B A1 A 7. Using a #2 Phillips Screwdriver, remove the 2 screws that secure the Right Shroud. Slowly remove the Right Main Shroud. Set the hardware safely aside for reassembly. 56
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51 -
52 -
53 -
54 -
55 -
56 -
57 -
58 -
59 -
60 -
61 -
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
 |
 |
56
6.
Using a #2 Phillips Screwdriver, remove the 6 screws (indicated) that
secure the Left Shroud. Remove the bottom screws first, and then the top
screws. Slowly remove the Left Shroud. Set the hardware and Shroud
safely aside for reassembly.
Note:
Find the Power Inlet (A) in the Left Shroud.
Disconnect the Power Inlet cable (A1) from
the wiring harness (B).
NOTICE:
Do not pinch or cut the cables.
7.
Using a #2 Phillips Screwdriver, remove the 2 screws that secure the
Right Shroud. Slowly remove the Right Main Shroud. Set the hardware
safely aside for reassembly.
B
A
A1