Schwinn 230 Recumbent Bike 2020 model Service Manual - Page 33
Motor Pulley Shaft E.
View all Schwinn 230 Recumbent Bike 2020 model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
7. Insert 2.5" x 10" cardboard between the Brake Magnet (C) and the Flywheel (B), and tape the cardboard to the Brake Magnet. Note: Be sure the cardboard covers all of the Brake Magnet. B C B 8. Use the pliers to unhook the Tension Spring (F) from the Main Frame. Pull back and release the Magnet Arm (D) enough to disengage it from the Motor Pulley Shaft (E). E D F 33
33
7.
Insert 2.5” x 10” cardboard between the Brake Magnet (C) and the
Flywheel (B), and tape the cardboard to the Brake Magnet.
Note:
Be sure the cardboard covers all of the Brake Magnet.
8.
Use the pliers to unhook the Tension Spring (F) from the Main Frame.
Pull back and release the Magnet Arm (D) enough to disengage it from the
Motor Pulley Shaft (E).
C
B
F
E
D
B