Sharp GX29 User Guide - Page 40
Using the Zoom Function, Selecting the Picture Size, Selecting the Anti-flicker Mode
View all Sharp GX29 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Using the Zoom Function Press c or d to change the zooming ratio. Zooming ratio indicators : Magnification. Note • When "Picture Size" is set to "S", the zoom function has 3 magnifications (×1, ×2, ×4). • When "Picture Size" is set to "M", the zoom function has 2 magnifications (×1, ×2). Selecting the Picture Size "Camera" → "Take Picture" → [Options] → "Picture Size" 1. Select the desired picture size. Selecting the Picture Quality "Camera" → "Take Picture" → [Options] → "Picture Quality" 1. Select "Normal" or "Fine". Picture quality indicators : Fine : Normal Selecting the Anti-flicker Mode "Camera" → "Take Picture" → [Options] → "Antiflicker" 1. Select "Mode 1: 50Hz" or "Mode 2: 60Hz". Note • Vertical stripes may occur on the picture due to the light source. Change the anti-flicker mode to rectify. • The digital camera uses a C-MOS sensor. Although this camera has been manufactured to the highest specifications, some pictures may still appear too bright or too dark. • If the phone has been left in a hot place for a long time before taking or registering a picture, the picture quality may be poor. In the Case of No Available Memory When the number of pictures that can be taken becomes 3 or less, the remaining shots indicator in the upper left of the screen turns red. (The number of pictures that can be taken is approximate.) When the number of pictures that can be taken becomes 0, and when you try to take a picture again, "Memory full. Please delete some data!" is displayed. 40 Camera