Sharp GX30 User Guide - Page 54

Taking Close-up Pictures 1. In digital camera mode, set the macro switch to the macro position ( ). 2. Press or the side-down key to take the picture. To cancel macro mode, set the macro switch to the normal position ( ). Using the Zoom Function Press c or d to change the zooming ratio. Note • When "Picture Size" is set to "S", the zoom function has 20 steps. • When "Picture Size" is set to "M", the zoom function has 10 steps. • When "Picture Size" is set to "L", the zoom function has 5 steps. • When "Picture Size" is set to "XXL" or "XL", you cannot use the zoom function. Selecting the Picture Size 1. In digital camera mode, press A [Options]. The Options menu is displayed. 2. Press a or b to highlight "Picture Size", then press or A [Select] to select. 3. Press a or b to highlight the picture size, then press to select. Selecting the Picture Quality 1. In digital camera mode, press A [Options]. The Options menu is displayed. 2. Press a or b to highlight "Picture Quality", then press or A [Select] to select. 3. Press a or b to highlight "Normal" or "Fine", then press to select. Retaking Pictures After steps 1 to 4 in "Taking Pictures" on page 52, press C [Cancel]. Further shooting is available. Note • The digital camera uses a CCD sensor. Although this camera has been manufactured to the highest specifications, some pictures may still appear too bright or too dark. • If the phone has been left in a warm place for a long time before taking or registering a picture, the picture quality may be poor. Camera 53