Sharp GX30 User Guide - Page 62

Using the Zoom Function Zooming ratio can be altered approximately up to 3 times in 10 steps. Press c or d to change the zooming ratio. Selecting Video Quality 1. In video camera mode, press A [Options]. The Options menu is displayed. 2. Press a or b to highlight "Video Quality", then press or A [Select] to select. 3. Press a or b to highlight "Normal" or "Fine", then press to select. Selecting the Recording Time You can switch the recording time. 1. In video camera mode, press A [Options]. The Options menu is displayed. 2. Press a or b to highlight the "Record Time", then press or A [Select] to select. 3. Press a or b to highlight "Extended Video" or "For Message Sending", then press to select. Note • "Save and Send" is not displayed after recording in extended video mode. In the Case of No Available Memory When the number of video clips that can be recorded becomes 3 or less, the remaining sets indicator in the upper left of the screen turns red. (The number of sets that can be recorded is approximate.) When the number of video clips that can be recorded becomes 0, and when you try to record a video clip again, "Memory full. You cannot record a video!" is displayed. Meanings of Indicators in Video Camera Mode Remaining sets indicator 123: Indicates the remaining sets of video clips that can be recorded. Flash light indicators (p. 64) Indicates when the flash light is turned on. : Normal mode : Macro mode Delay timer indicator (p. 63) : Indicates when Timer is set. Camera 61