Sharp LC-32D50U LC-32D50U Operation Manual - Page 7
Supplied accessories, QUICK REFERENCE, Attaching the stand - manual
UPC - 074000363274
View all Sharp LC-32D50U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Supplied accessories Make sure the following accessories are provided with the product. Remote control unit (g1) "AAA" size battery (g2) AC cord (g1) Page 8 Cable Clamp (g1) Cable tie (g1) Page 8 Stand unit (g1) Page 7 Operation manual (g1) Page 7 Page 7 NOTE • Always use the AC cord supplied with the TV. QUICK REFERENCE Page 6 Attaching the stand • Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. CAUTION • Attach the stand in the correct direction. • The "REAR" label should be visible from the back of the TV. Refer to the figure. • Incorrect installation of the stand may result in the TV falling over. • Be sure to follow the instructions. REAR This side faces the rear. 1. Confirm the 8 screws supplied with the TV. Short screws (m4) Long screws (m4) (used in step 2) (used in step 3) 3. 1 Insert the stand into the opening on the bottom of the TV. 2 Insert and tighten the 4 long screws into the 4 holes on the rear of the TV. 2. Attach the two parts of the stand unit to each other using the 4 short screws and the hex key (supplied with the product) as shown. Hex key 2 Long screw Short screw NOTE Hex key • To detach the stand, perform the steps in reverse order. 6 Soft cushion 1