Sharp LC-32D50U LC-32D50U Operation Manual - Page 70

Appendix Troubleshooting-Digital broadcasting The error message about reception of broadcast The example of an error message displayed on a screen Error code • Failed to receive broadcast. E202 Possible Solution • Check the antenna cable. Check that the antenna is correctly setup. • No broadcast now. E203 • Check the broadcast time in the program guide. The cautions about i.LINK Caution sentence • Record/Playback may fail on the selected model. Possible Solution • Displayed when you have selected a device that is not compatible with the TV, or that does not have DTLA copy protection technology installed. • Wrong connection or no i.LINK connection was found. Refer to Operation Manual on connection. • Displayed when a problem is experienced with a connection using i.LINK cable. Check the connection, and re-connect the cable if necessary. • The selected model is disabled to record/play. Check that no other model is used. • Displayed when the device you have selected is already being used by another i.LINK connected device. To operate the selected device from the TV, you will first have to override control from the other device. PC compatibility chart PC/MAC Resolution 720 x 400 VGA 640 x 480 PC SVGA 800 x 600 MAC13" MAC16" MAC19" XGA WXGA VGA SVGA XGA 1024 x 768 1360 x 768 640 x 480 832 x 624 1024 x 768 Horizontal Frequency 31.5 kHz 31.5 kHz 37.9 kHz 37.5 kHz 35.1 kHz 37.9 kHz 48.1 kHz 46.9kHz 48.4 kHz 56.5 kHz 60.0 kHz 47.7kHz 34.9 kHz 49.7 kHz 60.2 kHz Apple and Macintosh are registered trademarks of Apple Computer, Inc. DDC is a registered trademark of Video Electronics Standards Association. Power Management is a registered trademark of Sun Microsystems, Inc. VGA and XGA are registered trademarks of International Business Machines Co., Inc. Vertical Frequency 70 Hz 60 Hz 72 Hz 75Hz 56 Hz 60 Hz 72 Hz 75 Hz 60 Hz 70 Hz 75 Hz 60 Hz 67 Hz 75 Hz 75 Hz VESA Standard O O O O O O O O O O O 69