Sharp LC46LE700UN Owners Manual for LC-52LE700UN - Page 8

Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit "AAA" size battery (g1) (g2) Page 7 Page 8 AC cord (g1) Page 7 Cable clamp (g1) Page 7 Stand unit (g1) Page 6 Operation manual (g1) • Always use the AC cord supplied with the TV. • The illustrations above are for explanation purposes and may vary slightly from the actual accessories. • To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP for ordering, or VISIT www.sharpusa.com/SharpDirect. QUICK REFERENCE Attaching the Stand • Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. CAUTION • Attach the stand in the correct direction. • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. 1 Confirm that there are 12 screws (all the same size) supplied with the stand unit. 3 1 Insert the stand into the openings on the bottom of the TV. 2 Insert and tighten the 4 screws into the 4 holes on the rear of the TV. 2 1 Set the post for the stand unit onto the box. 2 Attach the base to the post. 3 Insert and tighten the 8 screws into the 8 holes on the bottom of the base. 2 Screws 2 • Hold the stand unit securely with one hand, and then Soft cushion tighten the screws. Screws 3 1 6 3 2 1 FRONT 1 1 • To detach the stand, perform the steps in reverse order.