Sony CCD-TRV238E User Manual - Page 39
Locating a scene on a tape for playback (TRV285E), Searching quickly for a desired scene – Zero set
View all Sony CCD-TRV238E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Playback When your TV is connected to a VCR Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable. Set the input selector on the VCR to LINE. When your TV is stereo For TRV238E/438E: Connect the audio plug of the A/V connecting cable to the left (white) input jack of your TV. When your TV is monaural (When your TV has only one audio input jack) For TRV270E/285E: Connect the yellow plug of the A/V connecting cable to the video input jack and connect the white or the red plug to the audio input jack of your TV or VCR. When you want to play the sound in monaural mode, use a connecting cable (optional) for that purpose. If your TV/VCR has a 21-pin connector (EUROCONNECTOR) To play back movies, connect your camcorder to the TV/VCR, using the 21-pin adaptor (optional). For TRV238E/438E: For TRV270E/285E: TV/VCR TV/VCR Locating a scene on a tape for playback ( TRV285E) Searching quickly for a desired scene - Zero set memory m REW PLAY STOP DISPLAY ZERO SET MEMORY 1 During playback, press ZERO SET MEMORY on the Remote Commander at the point you want to locate later on. The tape counter is reset to "0:00:00" and appears on the screen. If the tape counter is not displayed, press DISPLAY on the Remote Commander. 2 Press STOP when you want to stop playback. 3 Press m REW. The tape stops automatically when the tape counter reaches "0:00:00." 4 Press PLAY. The playback starts from the point designated "0:00:00" on the tape counter. To cancel the operation Press ZERO SET MEMORY on the Remote Commander again. ,continued Playback 39