Sony CCD-TRV238E User Manual - Page 83
Cassette tapes, LCD screen/viewfinder, Symptom, Cause and/or Corrective Actions
View all Sony CCD-TRV238E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Symptom Cause and/or Corrective Actions The remaining battery time indicator does not indicate the correct time. • The temperature of the environment is too high or too low, or the battery pack has not been charged enough. This is not a malfunction. cFully charge the battery again. If the problem persists, replace the battery pack with a new one. It may be damaged. (p. 12, 96) The power turns off frequently although the remaining battery indicator indicates that the battery pack has enough power to operate. • A problem has occurred in the remaining battery time indicator, or the battery pack has not been charged enough. cFully charge the battery again to correct the indication. (p. 12) The power abruptly turns off. • [A.SHUT OFF] in the (OTHERS) menu is set to [5 min]. (p. 58) cWhen approximately 5 minutes have elapsed while you do not operate your camcorder, the camcorder is automatically turned off. Slide the POWER switch down to turn the power on again. (p. 15) Or use the AC adaptor. A problem occurs when the camcorder is connected to the AC Adaptor. cTurn off the power, and disconnect the AC Adaptor from the wall socket. Then, connect it again. Cassette tapes Troubleshooting Symptom Cause and/or Corrective Actions Cassette cannot be ejected from the compartment. cMake sure the power source (battery pack or AC Adaptor) is connected correctly. (p. 12) cRemove the battery pack from the camcorder, then attach it again. (p. 12) cAttach a charged battery pack to the camcorder. (p. 12) Cassette is not ejected even when the cMoisture condensation is starting in your camcorder. (p. 99) cassette lid is open. The remaining tape indicator is not cSet [ REMAIN] to [ON] in the (TAPE SET) menu to always displayed. display the remaining tape indicator. (p. 54) LCD screen/viewfinder Symptom Cause and/or Corrective Actions An unknown language appears on the cSee page 19. screen. An unknown picture appears on the screen. cThe camcorder is in [DEMO MODE]. (The [DEMO MODE] is automatically displayed when you leave the camcorder for 10 minutes after selecting CAMERA without inserting a cassette.) Insert a cassette to cancel [DEMO MODE]. You can also set [DEMO MODE] to [OFF] in the menu. (p. 57) An unknown indicator appears on the cRefer to the indicator list. (p. 110) screen. ,continued Troubleshooting 83