Sony DCR-DVD201 Operating Instructions - Page 16
Charging the installed battery pack, After charging the battery pack - parts
UPC - 027242644557
View all Sony DCR-DVD201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Step 1 Preparing the power source Charging the installed battery pack Your camcorder operates only with the "InfoLITHIUM" battery pack (M series). See page 130 for more information on the "InfoLITHIUM" battery pack. Open the DC IN jack cover. 4 Power cord AC adaptor 3 POWER/CHG lamp With the v mark on the DC plug facing up 2 1 1 Make sure that the battery pack is installed on the camcorder. 2 Open the DC IN jack cover, then connect the AC adaptor supplied with your camcorder to the DC IN jack on your camcorder with the plug's v mark facing up. 3 Connect the power cord to the AC adaptor. 4 Connect the power cord to the wall outlet. Charging begins. The POWER/CHG lamp lights in orange during the charge, then turns off when the charge is completed (full charge). After charging the battery pack Disconnect the AC adaptor from the DC IN jack on your camcorder. Notes • Prevent metallic objects from coming into contact with the metal parts of the DC plug of the AC adaptor. This may cause a short-circuit, damaging the AC adaptor. • Place the AC adaptor near a wall outlet. If any trouble occurs with this unit while using the AC adaptor, disconnect the plug from the wall outlet as soon as possible to cut off the power. • The POWER/CHG lamp may flash if the battery pack is not installed correctly or the battery pack is damaged. 16