Sony DCR-DVD201 Operating Instructions - Page 50
Adjusting the white balance manually
UPC - 027242644557
View all Sony DCR-DVD201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Adjusting the white balance manually Normally white balance is adjusted automatically. Adjust manually in the following cases: •When shooting in a place that the light condition changes often such as a party hall. •When shooting a night scene and a neon sign. 1 Set the mode dial to (Movie) or (Still). 2 Press SETUP. 3 Use the multi-selector to select (MANUAL SET). MANUAL SET PROGRAM AE P EFFECT D EFFECT WHT BAL AUTO SHTR RETURN AUTO [ SETUP ] : END 4 Use the multi-selector to select [WHT BAL]. MANUAL SET PROGRAM AE P EFFECT D EFFECT WHT BAL AUTO SHTR RETURN AUTO HOLD OUTDOOR INDOOR [ SETUP ] : END 5 Select the desired white balance with the multi-selector. HOLD : When recording a single-colored subject or background (OUTDOOR) : •When recording a sunset/sunrise, just after sunset, just before sunrise •When recording a neon signs, or fireworks •Under a color-matching fluorescent lamp n (INDOOR) : •Where the lighting condition changes quickly •When recording in TV lighting in a studio •Under sodium lamps or mercury lamps 6 Press SETUP. The SETUP display disappears from the LCD display. To return to the automatic white balance mode Set (MANUAL SET) - [WHT BAL] to [AUTO] in the SETUP display. Notes •In the [HOLD] white balance, set the white balance to [AUTO] and reset it to [HOLD] after a few seconds: - when you change the [PROGRAM AE] setting. - when you take your camcorder outdoors from inside a house, or vice versa. •If you remove the power source longer than five minutes, the white balance returns to [AUTO] automatically. Tips •If the picture is being taken in a studio lit with a video light (optional), it is recommended that you record using [INDOOR]. •When you record under fluorescent lighting, use the [AUTO] or [HOLD]. Your camcorder may not adjust the white balance correctly when you use [INDOOR]. •In the automatic white balance mode, point your camcorder at a white subject for about 10 seconds after turning the power on to get a better adjustment: - after you replace the battery pack. - when you take your camcorder outdoors from inside a house while holding the exposure, or vice versa. •When you slide the NIGHTSHOT PLUS switch to ON, white balance returns to [AUTO]. 50