Sony DCR-DVD201 Operating Instructions - Page 26
Step 5 Preparing a disc for recording - dvd r rw
UPC - 027242644557
View all Sony DCR-DVD201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Step 5 Preparing a disc for recording A new DVD-R or DVD-RW is required for recording. You cannot overwrite or delete data recorded on a DVD-R, but you can delete data and record again with a DVD-RW. The preparation procedure is different depending on the type of disc you use. Notes •When you insert or remove a disc, move the grip belt to the bottom of the camcorder so as not to obstruct the operation with your hand, etc.. •Do not apply shock or vibration to your camcorder while [DISC ACCESS] or [PREPARING TO OPEN COVER] is displayed on the LCD display. •Formatting is required when a DVD-RW is used for the first time. 1 3 2 5 4 Make sure that the disc is not exposed to fingerprints and dust. 1 Set the mode dial to (Movie) or (Still). 2 Turn the power on by pressing the POWER button for a few seconds. 3 Slide the disc cover OPEN switch in the direction of the arrow mark. Opening melody rings once, then the camcorder beeps intermittently. [PREPARING TO OPEN COVER] appears on the LCD display. After the beep sound stops, the disc cover opens automatically. ACCESS lamp 4 Set the disc with the label side facing out, then press firmly to seat it on the center spindle until it clicks. 26